Question 1

What is mineral silicate paint?

Accepted Answer

Mineral silicate paint uses an inorganic silicate binder that chemically bonds with mineral substrates like concrete, plaster, lime, brick, and natural stone through a process called silicification. Unlike acrylic paint, which sits on the surface as a plastic-like film, silicate paint fuses with the wall itself through a micro-crystalline chemical bond. PureSil uses a proprietary RHA silicate (rice-husk-ash-derived waterglass) binder, and is India's zero-VOC mineral silicate paint engineered for 20+ year functional life.

Question 2

Is PureSil safe for homes with children, pets, and sensitive occupants?

Accepted Answer

Yes. PureSil is a completely zero-VOC (0 g/L), solvent-free formulation, so it releases no volatile organic compounds into indoor air during application or afterwards. The binder is a mineral silicate, the pigments are inorganic, and mould resistance comes from the paint's natural alkalinity rather than any leachable chemical biocide. It clears the most stringent global VOC thresholds, including SCAQMD Rule 1113, making it particularly suitable for bedrooms, nurseries, schools, and healthcare interiors.

Question 3

How long does PureSil last?

Accepted Answer

PureSil is engineered for a 20+ year functional life on a properly prepared facade with a single application. Because the silicification bond fuses the coating with the wall's own mineral structure, and because inorganic mineral pigments do not degrade under UV, the coating does not peel, blister, or fade the way film-forming paints do. This effectively removes the routine repaint cycle from the building's maintenance schedule.

Question 4

What makes PureSil different from conventional paint?

Accepted Answer

Most paints available today are acrylic emulsions, organic polymers that form a plastic-like film sitting on top of the wall. Over time this film peels, blisters, traps moisture, and requires a repaint every few years. Acrylics also carry VOCs and rely on chemical biocides to resist mould. PureSil is a fundamentally different chemistry. Its RHA silicate binder undergoes silicification, a micro-crystalline chemical fusion with the masonry itself, so the coating becomes part of the wall, breathes vapour freely (sd less than 0.01 m), resists mould through natural pH-11 alkalinity, and contains zero VOCs and zero solvents. It also actively sequesters CO2 from the atmosphere while curing.

Question 5

Does PureSil prevent mould, mildew, and algae?

Accepted Answer

Yes, naturally, without added biocides. PureSil has an inherent alkalinity of pH ~11 to 12, which creates an environment that actively resists the growth of mould, mildew, and algae on the coated surface. This is a passive mineral property of the paint itself, not a leachable chemical treatment that wears off over time.

Question 6

Can PureSil be applied over existing painted walls?

Accepted Answer

Because PureSil requires a chemical silicification bond with a bare mineral substrate, any existing oil-based, acrylic, or peeling latex coating must be completely stripped away first. On previously unpainted or freshly plastered surfaces (concrete, cement plaster, lime plaster, brickwork, natural stone, fly-ash brick, or unpainted stucco), PureSil applies directly. The Relic Coatings technical team provides surface-preparation guidance for every project.

Question 7

Is PureSil fire-safe?

Accepted Answer

Yes. PureSil carries an A1 fire classification, the highest reaction-to-fire category. It is completely non-combustible, produces zero flame spread, and emits no toxic smoke when exposed to fire. This makes it well-suited to commercial, institutional, and high-rise residential buildings with strict fire codes.

Question 8

Does PureSil really absorb carbon from the atmosphere?

Accepted Answer

Yes. During curing, the wet silicate binder chemically reacts with atmospheric CO2, locking carbon dioxide into the coating itself. A single coat sequesters approximately 3.5 grams of CO2 per square metre. Combined with its 85% upcycled feedstock (rice husk ash and coal fly ash) and 20-year functional life, which eliminates the multi-cycle repaint pattern typical of acrylic systems, PureSil delivers a cradle-to-gate footprint of ~1.2 kg CO2e per kg vs ~3.0 kg CO2e per kg for conventional acrylics.

Question 9

Who developed PureSil?

Accepted Answer

PureSil was developed by Dr. Nikhil Dhote, Founder and Chief Technologist at Relic Coatings LLP. Dr. Dhote holds a Ph.D. in Chemical Engineering from ACSIR - CSIR - NEERI, Nagpur, with 15+ years of specialisation in inorganic chemistry and industrial mineralogy. He pioneered the conversion of industrial by-products, rice husk ash and coal fly ash, into premium construction materials, and engineered the silicification chemistry, the zero-VOC formulation, and the RHA silicate binder that define PureSil today.

Question 10

How do I get pricing and a specification quote?

Accepted Answer

PureSil is supplied B2B directly through Relic Coatings LLP. For pricing, technical data sheets, coverage calculations, colour matching, and structural assessments, reach the technical team at +91-9051958434, email contact@puresilpaints.com, or use the contact page at https://puresilpaints.com/contact/. Custom colour matching is available for bulk orders exceeding 5,000 litres.

From Rice Husk Ash to Wall Paint: The Circular Economy Story

Why India Needs Silicate Paints: The Tropical Climate Case

Hello world!

Connect

Facebook

Instagram

X / Twitter

LinkedIn

Contact Us

+91-9051958434

+91-8669933555

Get In Touch

© 2026 Relic Coatings LLP. All Rights Reserved.

Contact Us

+91-9051958434

+91-8669933555

Get In Touch

© 2026 Relic Coatings LLP. All Rights Reserved.